Products

Marine VFD Retrofit Systems for Pumps and Fans

Variable frequency drives adjust motor speed in real time to match what your vessel actually needs: reducing energy consumption, extending equipment life, and paying back within one to two years.

Request a quote

Why auxiliary systems are the most overlooked efficiency opportunity in your fleet

Marine cooling pumps and ventilation fans are designed for worst-case conditions: seawater at 32°C, ambient air at 35°C, main engine at full output. In practice those conditions are rare. On temperate or northern routes, or with engines running under slow-steaming or de-rating programmes, auxiliary systems consume energy calibrated for a peak that rarely arrives. Fixed-speed motors manage the gap through valve throttling and flow bypass — workable, but wasteful.

EnergyOpt Variable Frequency Drives close that gap by adjusting motor speed in real time to match actual demand. The relationship is not linear: a 20% reduction in motor speed reduces power consumption by approximately 49%. A 30% reduction delivers around 66% saving. These are not projections — they are the affinity law for centrifugal machines, and they apply across every hour of operation.

‍

Where EnergyOpt delivers the greatest return

Seawater cooling pumps

SW cooling pumps are the primary target in most retrofit programmes. They run continuously, are sized for peak thermal rejection, and are typically controlled through valve throttling on fixed-speed installations. EnergyOpt replaces throttling with motor speed modulation driven by cooler outlet temperature and differential pressure feedback. On temperate or northern routes, these pumps spend the majority of the operating year well below design speed — delivering the largest single efficiency gain in the system.

Engine room ventilation fans

Ventilation fans are sized for a main engine at full MCR output. With engine de-rating increasingly standard for CII compliance and fuel efficiency, fans are systematically oversized for actual operating conditions. EnergyOpt tracks engine load via temperature and differential pressure measurements, reducing fan speed proportionally. Speed reductions of 20–30% are typical during de-rated operation, delivering power savings on the fan of 50–65% during those periods.

LT freshwater cooling pumps

Low-temperature cooling circuits serve auxiliary equipment and charge air coolers. EnergyOpt controls these using differential pressure feedback, maintaining stable flow and temperatures while reducing consumption. Tighter temperature control also delivers secondary benefits for charge air cooler performance.

‍

Complete turnkey delivery. Zero commercial downtime.

EnergyOpt is delivered as a fully managed project from initial engineering survey through commissioning and handover — no additional suppliers, no sub-contractors. Installation can be carried out during dry docking, at berth, or under operation. Our dedicated teams in Gdansk, Rotterdam, and Shanghai adjust the programme to your vessel’s operational pattern.

Scope list

  • Project management, scheduling, and regulatory interface
  • Electrical design: single-line updates, cable routing, interface specifications
  • Process engineering: control philosophy, sensor placement, setpoint definition
  • Automation: PLC programming and HMI development
  • Procurement: class-approved VFDs, panel builds, sensors, and cabling
  • Class approval: documentation and submission to flag state and classification society
  • Installation survey: onboard verification before equipment delivery
  • Commissioning: energisation, loop testing, control tuning, crew handover

‍The EnergyOpt system interfaces with the existing group starter panel. From the crew’s perspective, the panel operates exactly as before. No new procedures. No retraining.

‍

Successful installation of Manta VFDs onboard a Transpetrol vessel.

Built to marine standards. Backed by class.

Component selection

Bypass

Class documentation

Savings you can see - and prove